CircuPool® INDIGO3-S Replacement Lamp for Pool Ozone Generators
Using ozone to purify a swimming pool is incredibly effective when used with salt chlorination. CircuPool INDIGO3 ozone generators make it easy to have the safest, clearest, purest pool water possible. Reduce harmful chemicals by 60-90% while killing 99.99% of viruses, bacteria, & mold. The INDIGO3 ozone generator is built to last with all-aluminum construction and long-lifespan VUV bulbs. Even better, its a snap to install and setup - simply plug it in to a timer and connect it to your plumbing with its quick-clamp connections.
The INDIGO3-S ozone generator is meant to provide sanitation levels appropriate for above-ground and in-ground backyard swimming pools that get light use, maximum 15,000 gallons. Not sure what size you need? Choosing to have more than enough capacity is usually a better value and reduces required run times, extends ozone generator bulb lifespan, and increases your maximum sanitation power so you can easily deal with potential pool problems.
INDIGO3 Ozone Generators allow you to:
- Get the most complete spectrum of pool sanitation
- Ozone quickly destroys dangerous organisms and pathogens, including many contaminants that are chlorine-resistant.
- Get high-definition, crystal-clear water
- Ozone acts as a flocculent that binds together the microparticles responsible for poor water clarity so that your existing filter can finally remove them.
- Greatly extend the lifespan of your salt cell
- Salt chlorination is a must in order to maintain protective residual sanitation in the pool, and ozone dramatically reduces your salt cell's workload.
- Enhance the purity of your water
- Ozone works together with your salt system to create an even more effective sanitizer (Hydroxls) - similar to technology used to make purified bottled water!
Note: Ball valve not included. Venturi flow chamber color may vary.
The CircuPool INDIGO3-S uses a venturi Mazzei™ Injector to supply the generated ozone to the pool. The Injector gets plumbed in the existing return-line PVC plumbing with a standard ball valve (not included, readily available at your local hardware store). The Injector gets connected to the ozone generator wall unit in just moments using the included Polybraid Tubing and Quick-Clamps.
The INDIGO3 plumbing is ready for use with standard 2" pool plumbing, or can easily be adapted for 1 1/2" using off-the-shelf PVC reducers (not included).