Q: Does this include the cable connecting to the monitor?
A: Yes, that is correct. The cable is just not pictured, but it is build in to the cell just like your original.
Q: I have a SI series but don't know, manual doesn't say, if its a 30 or 45? I have a 18,000 gallon pool. is the -30 and -45 the same overall length? Connections to the controller the same? I don't want to replumb the system. Thanks.
A: Both cells are the same length and connections. The cell should have two silver stickers on it, each will reference the model and/or gallon capacity. If you are unsure, please contact tech support at 888-206-9938 ext:2 and we'll be happy to help.
Q: is the whole unit sold or just the cell, and how easy to install,?
A: This item is just the replacement cell if you already have an existing Si-30 salt chlorine generator. You can replace an old cell typically in just minutes. If you need a comple salt chlorinator unit, give us a call and we'll be glad to help: 888-206-9938 ext:1
Q: What version should be on the Circupool Module for the SI 30. I believe mine is set on 9.
A: The cell setting for an Si-30 cell should be F-9
Q: My Cell that im replacing is a Si Plus what should I replace it with?
A: If you have an Si30+, then yes you would replace it with this cell.
Q: is cable installed ready to use
A: Yes, the cable is a permanent part of the cell and comes with the item.
Q: I currently have an si 30 does it have to be replaced with another 30 salt cell or can I up size to a 40. My pool size is approx 15000 gallons but I’ve always tested low for chlorine for as long as I’ve had the system. Thank you.
Rp 818 512 2264.
A: Yes, your model can handle the 40/45 cell size. If there is high chlorine demand, that is a good choice and a better value as well.