Using ozone to purify a swimming pool is incredibly effective when used with salt chlorination. CircuPool INDIGO3 ozone generators make it easy to have the safest, clearest, purest pool water possible. Reduce harmful chemicals by 60% - 90% while killing 99.99% of viruses, bacteria, & mold (even dangerous Cryptosporidium). The INDIGO3 ozone generator is built to last with all-aluminum construction and long-lifespan VUV bulbs. Even better, its a snap to install and setup - simply plug it in to a timer and connect it to your plumbing with its quick-clamp connections.
The INDIGO3-S ozone generator is meant to provide sanitation levels appropriate for above-ground and in-ground backyard swimming pools that get light use, maximum 15,000 gallons. Not sure what size you need? Choosing to have more than enough capacity is usually a better value and reduces required run times, extends ozone generator bulb lifespan, and increases your maximum sanitation power so you can easily deal with potential pool problems.
Note: Ball valve and Venturi flow chamber color may vary.
Our products are backed by USA-Based Expert Support & USA-Based Factory Warranty
Select a row below to filter reviews.
We're happy to go over things in detail at 888-206-9938
The IO3-S model would likely be sufficient for your pool, though you could use the larger sizes as well.
Ozone generators operate & provide their benefits when your pump is running. Variable Speed (VS) Pumps are designed to provide you long run times while using less energy, so you should consider allowing it to longer run times in general. This will also increase the ozone generator's benefits. More is better.
Ozone generators are an excellent upgrade for a salt chlorine generators. It is typically recommended to install the ozone generator upstream from the salt chlorine generator, as there is enhanced performance from the ozone going through the salt cell.
The CircuPool INDIGO3-S uses a venturi Mazzei™ Injector to supply the generated ozone to the pool. The Injector gets plumbed in the existing return-line PVC plumbing with a standard ball valve. The Injector gets connected to the ozone generator wall unit in just moments using the included Polybraid Tubing and Quick-Clamps.
The INDIGO3 plumbing is ready for use with standard 2" pool plumbing, or can easily be adapted for 1 1/2" using off-the-shelf PVC reducers (not included).