The Balance Control upgrade kit is controlled through the CORE CONTROL module, which serves as the command center for monitoring and adjusting your pool’s water chemistry. Using precision sensors, the system continuously reads your pool’s ORP and pH levels. The upgrade kit connects to the My-Pool mobile app, where you can view live sensor readings, adjust chlorine output, set pH/ORP targets, calibrate sensors, and receive real-time alerts and maintenance reminders—all from your smartphone or tablet.

When paired with the optional Acid Injection Kit, the system’s control capabilities expand even further. The integrated dosing pump is automatically activated when pH levels exceed your set point, injecting small, measured amounts of acid until ideal balance is restored. Safety features are built-in, including automatic shutoff if the system detects prolonged dosing without correction, and low-acid alerts to prevent dry operation. Together, these controls allow you to automate and fine-tune your pool’s essential water chemistry with confidence, reducing manual tasks and ensuring clean, balanced water around the clock.

The Balance Control upgrade kit is designed for easy integration into your existing pool plumbing setup. The upgraded cell housing can be easily swapped out for your existing CORE CONTROL cell housing. When the optional Acid Injection Kit is added, a one-way injection port is also installed into the cell housing to allow for safe acid delivery.

The dosing pump connects to this injection point using peristaltic-grade tubing, ensuring acid is introduced downstream of the sensors and properly diluted in the water flow. The weighted suction line draws acid from the optional 7.5-gallon storage tank, which is positioned near the pump system for easy refilling and maintenance.

All connections are designed to be quick and secure, with minimal plumbing modification required. Whether you're upgrading an existing CircuPool CORE CONTROL system or installing the Balance Control kit for the first time, the plumbing process is straightforward and well-supported by the system’s plug-and-play components.

The CircuPool BALANCE CONTROL Upgrade Kit includes a specially-designed replacement cell housing that enables integration of water chemistry monitoring and automation. This upgraded housing features pre-threaded sensor ports and dosing connections for plug-and-play compatibility with additional automation components.

The upgrade kit includes:

• Balance Control Cell Housing – Custom-designed to accommodate ORP and pH sensors and optional acid injection port.

• Sensor Port Plugs – Used to seal unused sensor ports if not all upgrades are installed.

• Mounting Hardware & Seals – O-rings, locking nuts, and gaskets for reliable, leak-proof installation.

• ORP Sensor – Measures sanitizer effectiveness and allows the system to intelligently control chlorine output based on demand.

• pH Sensor – Tracks water acidity and supports display, alerts, and automated dosing when paired with the acid kit.

• Instruction Manual – Full installation and configuration guide.
  
  
  

The Acid Injection Kit (sold separately) is an optional upgrade that enables fully automated pH management and includes:

• Peristaltic Dosing Pump – Precision acid pump with plug-and-play connector and bracket.

• Suction & Discharge Tubing – Peristaltic-grade chemical tubing with pre-sized lengths.

• Weighted Strainer & Ferrules – Keeps tubing submerged and secured inside acid tank.

• Power Cable – Pre-wired for direct connection to Balance Control system.

• Injection Fitting – One-way acid injection port for cell housing.

• Optional 7.5-Gallon Acid Storage Tank – High-capacity container with safety lid and built-in spill protection (sold separately).